INTERIOR PANELS / TRIM: REAR CONSOLE BOX: REASSEMBLY (2008 Sequoia)

Last Modified: 11-29-2007		1.6 A
Service Category: Vehicle Interior	Section: Interior Panels/Trim
Model Year: 2008	Model: Sequoia	Doc ID: RM000003G3D002X
Title: INTERIOR PANELS / TRIM: REAR CONSOLE BOX: REASSEMBLY (2008 Sequoia)

REASSEMBLY

1. INSTALL CONSOLE BOX ORNAMENT

(a) Install the console box ornament with the 2 screws.

2. INSTALL REAR DOOR PANEL CUSHION

(a) Install the 2 cushions.

3. INSTALL CONSOLE COMPARTMENT DOOR HINGE SUB-ASSEMBLY

(a) Install the door hinge with the 4 screws.

(b) Engage the 4 claws and install the console box retainer.

4. INSTALL REAR CONSOLE COMPARTMENT DOOR BOX COVER

(a) Install the door box cover with the 7 screws.

5. INSTALL REAR CONSOLE ARMREST HINGE SUB-ASSEMBLY

(a) Install the armrest hinge with the 6 screws.

6. INSTALL REAR DOOR PANEL CUSHION

(a) Install the 2 cushions.

7. INSTALL CONSOLE COMPARTMENT DOOR BOX INSERT

(a) Install the door box insert with the 6 screws.

8. INSTALL CONSOLE COMPARTMENT DOOR LOCK LEVER

(a) Install the door lock lever with the 2 screws.

9. INSTALL NO. 2 CONSOLE BOX HOLE COVER

(a) Engage the 2 claws and install the console box hole cover.

10. INSTALL CONSOLE REAR END PANEL GARNISH

(a) Engage the 6 clips and install the console rear end panel garnish.

11. INSTALL CONSOLE BOX LOWER

(a) Install the console box lower with the 10 screws.

12. INSTALL CONSOLE UPPER PANEL NO. 2 GARNISH

(a) Install the console upper panel garnish with the 7 screws.

13. INSTALL CONSOLE UPPER PANEL NO. 1 GARNISH

(a) Install the console upper panel garnish with the 7 screws.

14. INSTALL CONSOLE BOX REAR COVER

(a) Engage the 2 claws and 4 clips and install the console box rear cover.

(b) Install the 2 screws.

15. INSTALL UPPER CONSOLE DOOR SUB-ASSEMBLY

(a) Install the upper console door with the 5 screws.

16. INSTALL EQUIPMENT SET PANEL COVER

(a) Engage the 4 clips and install the equipment set panel cover.

(b) Install the 2 screws.

17. INSTALL NO. 1 INSTRUMENT PANEL CUP HOLDER SPRING

(a) Install the cup holder spring to the cup holder rail.

18. INSTALL CONSOLE BOX INSERT

(a) Engage the 2 claws and install the console box insert.

(b) Install the 5 screws.

19. INSTALL CONSOLE BOX

(a) Install 2cup holder rails to the new console box.

(b) Install the console box.

20. INSTALL CONSOLE BOX ASSEMBLY

(a) Engage the 4 clips and install the console box.